Ovrboard Wholesale

Pre-order Items Available

We have the newest hobby gaming products from your favorite brands available for pre-order!
[Preorder Product List]

New Items Available

Check here to see what new items we have available!
[New Product List]

Welcome Game Shops!

Would you like to improve your supply chain?
[Request Wholesale Account]

ArmsKeeper Glues: Finish-cure 20min Finishing Epoxy (4.5 oz.)

Brand: ArmsKeeper

Code:	ARM209
Category:	Gaming Accessories
Retail:	$18.99
Cost:	please inquire

Description:

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.

ArmsKeeper
Best Sellers (all)

ArmsKeeper Glues: Insta-Cure+ Gap Filling (.5 oz.)

ArmsKeeper Glues: Maxi-Cure Extra Thick (.5 oz.)

ArmsKeeper Glues: Insta-Cure Super Thin (.5 oz.)

ArmsKeeper Glues: Insta-Set Accelerator (2 fl. oz.)

ArmsKeeper Glues: Insta-Cure+ Gap Filling (1 oz.)

FREE FREIGHT for Qualified Store Orders!